Description
Powerful Control. Simple Interface. Ready for Any Hunt.
The XP ICON Remote Control combines an intuitive, sunlight-readable display with FMF® multi-frequency control, customizable programs, advanced audio, precise target information, wireless accessory management, and easy access to the settings you use most in the field.
3 Factory Programs + 3 User Programs
Start quickly with three factory programs, then save up to three personalized user programs for your preferred settings.
ICON Control Features
Adjust detector response, target filtering, ground handling, and search behavior directly from the ICON remote.
FMF® Multi-Frequency Control
Use simultaneous FMF® multi-frequency operation with automatic or manual frequency shifting, plus 4 kHz and 14 kHz single-frequency options.
25 Sensitivity Levels
Adjust sensitivity across 25 levels to match site conditions, target response, and electromagnetic interference.
5 Reactivity Levels
Choose Reactivity levels 1 through 5 to adjust target separation and response speed for cleaner or more target-dense sites.
Adjustable Discrimination
Fine-tune target acceptance with discrimination from -6 to 10 in 1-point steps, along with an all-metal mode for maximum target information.
28-Segment Multi-Notch
Reject selected conductivity ranges while keeping desirable targets above and below the rejected range detectable.
Ground Balance Options
Use Ground Grab, manual adjustment, or automatic Tracking to adapt detector response to changing ground conditions.
Target ID & Depth Information
The LCD displays target conductivity information, program status, sensitivity, ground information, and a target depth gauge.
Audio & Visual Pinpoint
Non-motion Pinpoint mode helps center a detected target using both audio feedback and visual information on the display.
Frequency Scan
Run a frequency scan to help find a cleaner operating channel when electrical interference is present.
Advanced Audio Control
ICON provides multiple tone and audio options so you can customize how target information sounds in the field.
Multiple Tone Modes
Choose Pitch, 2 Tone, 3 Tone, 5 Tone, or Full Tones for different levels of audible target information.
PWM & SQUARE Audio
Select XP's dynamic PWM response or the smoother SQUARE audio profile to change the character of target sounds.
Stereo Audio Morphing
When paired with compatible XP ST-series stereo headphones, Stereo Audio Morphing adds spatial audio information that can provide a richer and more intuitive perception of target response. Requires compatible XP ST-series stereo headphones such as WSA-ST, WSA-XL ST, or WS6-ST. Stereo headphones sold separately.
Adjustable Iron Volume
Control how prominently ferrous targets are heard, allowing you to retain useful iron information without overwhelming desirable target responses.
Speaker & Headphone Volume
Manage speaker and compatible headphone volume directly from the remote for convenient adjustment in the field.
Automatic Audio Output Selection
The system can automatically manage supported audio outputs for convenient switching between compatible listening options.
Wireless & Connected
- XP digital wireless protocol with very low latency of approximately 4 ms.
- 36 automatic wireless channels help maintain fast and stable communication.
- Pair compatible XP wireless headphones directly from the remote control.
- Wireless pairing and control for the XP MI-6 pinpointer.
- XP Go Terrain app connectivity for supported hunt and find-tracking features.
- USB-C access for charging and software updates.
Remote Control Specifications
Powerful ICON Control Without Unnecessary Complexity
With fast program selection, FMF® control, precise Target ID, adjustable discrimination and Reactivity, advanced audio, ground controls, wireless accessory management, and software updates, the XP ICON Remote Control delivers a capable and intuitive interface for everyday detecting.